Red Hat GFS 6.1 - Administrator'S Manual Download

Page: 33 / 86

Chapter 3. Installing GFS

To determine which RPMs to include in the installation, perform the following steps:

1. Determine whether you are installing Red Hat Cluster Suite with DLM or Red Hat

Cluster Suite with GULM.

a. If you are installing Red Hat Cluster Suite with DLM, refer to Table 3-1 to

identify which RPMs are required, optional, and for development.

b. If you are installing Red Hat Cluster Suite with GULM, refer to Table 3-2 to

identify which RPMs are required, optional, and for development.

2. If you are installing Red Hat GFS, refer to Table 3-3 to identify which RPMs are

required, optional, and for development.

3. With the information gathered in the previous steps, proceed to install the RPMs

using the procedures in Section 3.1.2.2

Installing Packages with the

rpm

Utility

RPMs

Inclusion Depends

Kernel

Type?

Purpose

ccs-

ver

rel

arch

Req

The Cluster

Configuration

System

cman-

ver

rel

arch

Req

The Cluster

Manager

cman-kernel-

ver

rel

arch

cman-kernel-hugemem-

ver

rel

arch

cman-kernel-smp-

ver

rel

arch

Note:

The types of RPMs available vary

according to RHN channel.

Req

Yes

The Cluster

Manager kernel

modules

dlm-

ver

rel

arch

Req

The Distributed

Lock Manager

dlm-kernel-

ver

rel

arch

dlm-kernel-hugemem-

ver

rel

arch

dlm-kernel-smp-

ver

rel

arch

Note:

The types of RPMs available vary

according to RHN channel.

Req

Yes

The Distributed

Lock Manager

kernel modules

fence-

ver

rel

arch

Req

The cluster I/O

fencing system

Summary of Contents for GFS 6.1 -























































































Search results

Summary of Contents for GFS 6.1 -

Reviews:

Related manuals for GFS 6.1 -

Brands by name

Popular brands

Red Hat GFS 6.1 -, Administrator'S Manual

Search results

Summary of Contents for GFS 6.1 -

Reviews:

Related manuals for GFS 6.1 -

Brands by name

Popular brands