Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7 Overview Download Page 75

Page: 75 / 78

• lvs (8) - report information about logical volumes

• Global Network Block Device

• gnbd_export (8) - the interface to export GNBDs

• gnbd_import (8) - manipulate GNBD block devices on a client

• gnbd_serv (8) - gnbd server daemon

• LVS

• pulse (8) - heartbeating daemon for monitoring the health of cluster nodes

• lvs.cf [lvs] (5) - configuration file for lvs

• lvscan (8) - scan (all disks) for logical volumes

• lvsd (8) - daemon to control the Red Hat clustering services

• ipvsadm (8) - Linux Virtual Server administration

• ipvsadm-restore (8) - restore the IPVS table from stdin

• ipvsadm-save (8) - save the IPVS table to stdout

• nanny (8) - tool to monitor status of services in a cluster

• send_arp (8) - tool to notify network of a new IP address / MAC address mapping

3. Compatible Hardware

For information about hardware that is compatible with Red Hat Cluster Suite components (for

example, supported fence devices, storage devices, and Fibre Channel switches), refer to the

hardware configuration guidelines at

http://www.redhat.com/cluster_suite/hardware/

Compatible Hardware

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 4.7















































































Search results

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Reviews:

Related manuals for CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Brands by name

Popular brands

Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.7, Overview

Search results

Summary of Contents for CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Reviews:

Related manuals for CLUSTER SUITE FOR ENTERPRISE LINUX 4.7

Brands by name

Popular brands