Red Hat CERTIFICATE SYSTEM 8 - DEPLOYMENT, Install Manual

Page: 34 / 132

Chapter 3. Installation and Configuration
24
See
Section 3.5, “Configuring a DRM, OCSP, or TKS”
and
Section 3.4, “Configuring an RA”
for the
process on installing and configuring the OCSP, DRM, TKS, and RA subsystems.
6. Configure the TPS subsystem. The TPS requires having an existing TKS and DRM available when
it is configured, so this is the last subsystem to set up.
See
Section 3.6, “Configuring a TPS”
for the process on installing and configuring the TPS.
The order in which subsystems are configured is very important because of the basic relationships
which are established between subsystems at the time they are installed. For example, every
subsystem depends on a certificate authority; the TPS also depends on a TKS and (optionally) DRM.
Figure 3.1. Order of Subsystem Configuration