Red Hat Application Server Manual Download Page 253

Page: 253 / 296

Chapter 33.

Distributed Message Beans in JOnAS 4.1

JOnAS release 4.1 dramatically simplifies the use of a distributed JORAM platform from within

JOnAS servers. Such a configuration allows, for example, a bean hosted by JOnAS instance "A"

to send messages on a JORAM queue, to which a Message-Driven Bean (MDB) hosted by JOnAS

instance "B" listens.
The reasons for this progress are:

•

The JORAM Resource Adapter allows much finer configuration than the JMS service did.

•

JORAM provides a distributed JNDI server that enables JOnAS instances to share information.

Note

Before you proceed with this chapter, you should review Section 3.7.1

JORAM Resource Adapter

33.1. Scenario and General Architecture

The following scenario and general settings are proposed:

•

Two instances of JOnAS are run (JOnAS "A" and JOnAS "B"). JOnAS A hosts a simple bean that

provides a method for sending a message on a JORAM queue. JOnAS B hosts a Message-Driven

Bean that listens on the same JORAM queue.

•

Each JOnAS instance has a dedicated, collocated JORAM server: server "s0" for JOnAS A, "s1"

for JOnAS B. Those two servers are aware of each other.

•

The queue is hosted by JORAM server s1.

•

An additional JNDI service is provided by the JORAM servers. This service is used for storing the

shared information (basically, the queue’s naming reference).

33.2. Common Configuration

The JORAM servers are part of a single JORAM platform, described by the following

a3servers.xml

configuration file:

?xml version="1.0"?

config

domain name="D1"/

server id="0" name="S0" hostname="hostA"

network domain="D1" port="16301"/

service

class="org.objectweb.joram.mom.proxies.ConnectionManager"
args="root root"/

service

class="org.objectweb.joram.mom.proxies.tcp.TcpProxyService"
args="16010"/

service

class="fr.dyade.aaa.jndi2.distributed.DistributedJndiServer"
args="16400 0"/

Summary of Contents for Application Server









































































































































































































































































































Search results

Summary of Contents for Application Server

Reviews:

Brands by name

Popular brands

Red Hat Application Server, Manual

Search results

Summary of Contents for Application Server

Reviews:

Brands by name

Popular brands