ENGLISH
REDFIRE Series
| User manual
6
7
Series
User manual
|
REDFIRE
Series
4
|
TROUBLESHOOTING
PROBLEM
LEDS
SOLUTION
No sound or very low
sound level
Power LED
turned off
Make sure the device is properly
connected to the mains outlet
Power LED turned on,
but low MASTER VOL
Raise MASTER VOL level
Power LED turned on,
MASTER VOL raised but
low input channel signal
Check the connections between
the sources and the inputs.
Raise channels LEVEL
Distortion
Clip LED on
Cut MIC channel, LINE channel
and/or MASTER levels.
Make sure you haven’t
connected a line level signal
to the MIC input
Booming sound
Cut LOW level
Harsh sound
Cut HIGH level
1 POWER ON/OFF
Use this switch to turn On/Off the unit.
2 FUSE
AC Protection fuse.
Caution
: Replace the fuse only with one of the same type and with the same
value. If the fuse blows repeatedly, contact an authorized service center.
3 MAINS INPUT
IEC mains socket with integrated EMI filter.
Each package is supplied with the power cord for your area. Insert the mains cable
into this socket, but make sure the device is switched off before connecting the
cable to the mains. For your safety, never disconnect the earth lead.
WARNING!
Never remove the product’s front protection mesh. In order to prevent electric
shock hazard, in the event of accidental damage or replacement of the
protection mesh (which must be carried out by a service center), disconnect
the power supply immediately.
CAUTION: To reduce the risk of electric shock, do not connect the appliance
to the power supply while the mesh is removed.
1
2
3
3.2
|
ALIMENTAZIONE
