Red-D-Arc EXTREME 360 MAP Auto-Line, Owner'S Manual

Page: 36 / 56

OM-237 881 Page 32
7-5. Pulsed MIG - Wire and Gas Selection Table
WIRE TYPES* GAS TYPES
Steel
.035 (0.9) STL
.045 (1.2) STL ARGN CO2 (ARGON / CARBON DIOXIDE)
ARGN OXY (ARGON / OXYGEN)
Metal Core
.045 (1.2) MCOR
.052 (1.4) MCOR
ARGN CO2 (ARGON / CARBON DIOXIDE)
Stainless Steel
.035 (0.9) SSTL
.045 (1.2) SSTL
TRI MIX (TRI-GAS MIXTURE)
ARGN OXY (ARGON / OXYGEN)
ARGN CO2 (ARGON / CARBON DIOXIDE)
Aluminum
.035 (0.9) AL4X (4000 Series)
.040 (1.0) AL4X (4000 Series)
3/64 (1.2) AL4X (4000 Series)
1/16 (1.6) AL4X (4000 Series)
ARGN (ARGON)
.035 (0.9) AL5X (5000 Series)
.040 (1.0) AL5X (5000 Series)
3/64 (1.2) AL5X (5000 Series)
1/16 (1.6) AL5X (5000 Series)
ARGN (ARGON)
HE AR25 (HELIUM/ARGON)
Nickel
.035 (0.9) NI
.045 (1.2) NI ARGN HE (ARGON / HELIUM)
ARGN (ARGON)
Copper Nickel
.035 (0.9) CUNI
.045 (1.2) CUNI
HE ARGN (HELIUM / ARGON)
Silicon Bronze
.035 (0.9) SIBR
.045 (1.2) SIBR
ARGN (ARGON)
*Wire diameter in inches (mm). Refer to section 5-3 to change displayed units.
.
Other normal gas mixtures can be used by adjusting arc length and sharp arc. Use the program closest to your gas mixture and wire type and
size.
Notes
Work like a Pro!
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.