63
Cleaning the comb attachment (4)
Blow on the comb attachment (4) after the application in
order to clean it of hair. Fine hairs can also be removed
with your fingers.
To clean the comb attachment (4) particularly thoroughly,
you can rinse it under running water.
Proceed as follows:
1. Pull the comb attachment (4) off the device.
2. Hold the comb attachment (4) under running water.
3. Leave the comb attachment (4) to dry completely before
you reattach it to the device.
• Ensure that no water enters the device. If this should
happen, do not use the device again until it has fully
dried out.
• Protect the device from impacts, moisture, dust,
chemicals, marked temperature fluctuations and nearby
sources of heat (ovens, heaters).
• Clean the device after use with a soft, slightly damp
cloth. If it is very dirty, you can also moisten the cloth
with a mild soapy solution. Do not use any abrasive
cleaning products.
Summary of Contents for SMR 19
Page 67: ...67...
