Red Bull Racing RB-RTEN10, User Manual

Page: 11 / 60

11
Error status
When one of these error codes appear on the display, kindly contact your retailer or after-sale-service for immediate
assistance.
Remarks: When the above error occurs, the rear tail lamp will flash at 10Hz high frequency. The motor will not operate;
therefore, the motor cannot be seen as damage when it does not operate when error occurs.
Part
Status Meaning
Description
Controller
E01 Over-current protection.
When the vehicle travels on a slope or
accelerates suddenly with huge load, it would
trigger the alarm due to over-current. Recovery
needs to reduce load (reduce current).
E02
Low-voltage protection. Battery is nearly
out of power.
It usually appears during use, meaning the
battery is low.
E03 Over-voltage protection.
Normally it will not happen during customer
use. If this situation occurs during proper use
with right speedometer, it may apply the
battery with larger voltage than the right
battery of this model.
If the battery is correct, please check the
speedometer if it is 36V or 48V. This situation
will occur when speedometer of 36V match
with 48V battery, because full battery level of
36V battery is 42V.
E04 Rotor-lock protection.
It usually happens when the climbing slope is
too big, which causes rotor overload and finally
the rotor would be locked.