INTRODUCTION
SONY CYBER-SHOT DSC-RX1 & RX1R Underwater Housing WHS-RX1
※
Thank you for purchasing the WHS-RX1 Underwater Housing.
※
To ensure proper and safe use, please thoroughly read this manual.
※
Improper use may cause leakage causing irreparable damage to your digital camera.
※
Please check, and test the housing according to this manual prior to use.
※
Neither NTF Corporation, Seatool/Resea nor their agents shall warrant or bear any
responsibility for any incident related to water leakage, damage or loss of data,
unauthorized modification, disassembly and repair; or any accident causing physical or
material damage while using this product.
※
This product is manufactured by machining methods. As a result, there may be minor
scratching or tool marks. These are a normal part of the manufacturing process, do not
effect operation of the housing or camera, and are not subject to warranty or any other
claims.
WARNING!
※
Do not store or leave housing in reach of infants or small children. The strap may cause
chocking and suffocation, or small parts may be swallowed causing injury.
※
Please remove digital camera from housing when not in use. Battery malfunction or
damage may cause fire.
※
The housing body is made of corrosion-resistant aluminum. However, saltwater can cause
rusting so be sure to rinse thoroughly using fresh water without fail.
CAUTION!
※
To prevent water leakage and damage, DO NOT disassemble or modify this housing.
※
Do not store the housing in areas of high humidity, high or low temperatures, or areas of
extreme temperature fluctuation. Doing so may cause deterioration of parts.
※
When diving, use a method of water entry that protects the housing from shock, which can
cause water leakage. If at all possible have housing handed to you after entering the
water.
※
This housing is designed to withstand depths of 100 meters (328 feet). Using the housing
at deeper depths may cause damage and water leakage. Use caution and monitor depth.
※
Remove O-ring or leave housing slightly open when transporting by plane. Pressurization
of a sealed housing during transport may cause damage or make it difficult to open.
※
When opening and closing the housing be mindful of dust and other contaminants, which
may adhere to the O-ring, possibly causing water leakage and damage.
※
Always check O-ring prior to each use. Pay special attention to the grease condition and
that the O-ring is seated uniformly in the O-ring groove with no twists or bulges. Neglecting
to check the O-ring prior to each use may result in water leakage and damage.
FEATURES OF THIS PRODUCT
※
Compacted and durable, precision machined corrosion-resistant aluminum housing.
※
Designed to withstand depths of 100 meters (328 feet).
※
Fixed Lens Port with M67 thread mount.
※
Original Secure-Latch locking mechanism for easy opening and closing.
※
Front Port Macro Switching Ring and Focusing Ring Dials.
※
Rear Control Wheel Dial.
※
Half-Press Shutter Trigger for precise camera shutter control.
※
Quality silicone O-ring with wider Back Cover contact surface for added protection at
greater depths.
※
Complete camera function control.
※
Variety of supported RECSEA original options.
1.
Summary of Contents for WHS-RX1
Page 12: ...MEMO...
