INTRODUCTION - RECSEA RML-18650
※
Thank you for purchasing the RECSEA RML-18650 Underwater 1000Lm Mini LED.
※
To ensure proper and safe use, please thoroughly read this manual.
※
Improper use may cause leakage causing irreparable damage to the light.
※
Please check, and test the ligh according to this manual prior to use.
※
Neither NTF Corporation, Seatool/Resea nor their agents shall warrant or bear any
responsibility for any incident related to water leakage, damage due to unauthorized
modification, disassembly and repair; or any accident causing physical or material
damage while using this product.
※
This product is manufactured by machining methods. As a result, there may be minor
scratching or tool marks. These are a normal part of the manufacturing process, do not
effect operation of the housing or camera, and are not subject to warranty or any other
claims.
WARNING!
※
Due to the intensity of the LED used in this product do NOT look directly into the light with
the naked eye. Do not point or shine light into the eyes of others around you. There is the
possibility of blindness or visual impairment.
※
This product uses batteries and may cause short-circuit of terminals, electric shock or fire
if used incorrectly.
※
Do not store or leave product in reach of infants, small children or those who do not know
how to properly operate it. The strap may cause chocking and suffocation, small parts may
be swallowed causing injury, and may cause blindness or visual impairment.
※
This product uses one (1) 3500mAh 18650 Protected Li-ion 3.7V rechargeable battery
(
battery and charger not included
). Other battery types are not recommended.
※
Remove battery during extended periods of non-use. Battery malfunction or damage may
cause fire. If light is accidentally switch or left on the LED is capable of generating enough
heat to cause burns and/or fires.
※
When submerged and internal pressure is high there is a possibility that gas is emitted
from the battery. Please be careful to avoid injury when opening.
※
\
This product is not absolute and is not recommended as the sole source of light during
night or cave diving. Be sure to carry a spare in case of an emergency situation.
※
The body of this product is made of corrosion-resistant aluminum. However, saltwater can
cause rusting so be sure to rinse thoroughly using fresh water without fail.
CAUTION!
※
To prevent water leakage and damage, DO NOT disassemble (other than as instructed
herein) or modify this product.
※
Do not store the product in areas of high humidity, high or low temperatures, or areas of
extreme temperature fluctuation. Doing so may cause deterioration of parts.
※
When diving, use a method of water entry that protects the product from shock, which can
cause water leakage.
※
This product is designed to withstand depths of 300 meters (984 feet). Using this product
at deeper depths may cause damage and water leakage. Use caution and monitor depth.
※
When opening and closing battery compartment be mindful of dust and other
contaminants, which may adhere to the to the O-rings, possibly causing water leakage
and damage.
※
Always check O-rings and perform O-ring maintenance in accordance with instructions
prior to each use. Pay special attention to the grease condition and that the O-rings are
seated uniformly in the O-ring grooves with no twists or bulges. Neglecting to check the O-
rings prior to each use may result in water leakage and damage.
※
The lens is manufacture of acrylic, be careful so as not to damage it when cleaning or
during use.
1.
Summary of Contents for RML-18650
Page 8: ...MEMO...
