7
2
Power On/Off
A.
Power On -
Make sure a micro SD card is
inserted. Plug the LC500W into a USB wall
charger using the provided USB cable. Slide
the power switch to the ON position (located
on the back).
B.
Power Off -
Slide the power switch to OFF
3
Record In Continuous/
Motion Detection
The LC500W can record in either
continuous or in motion activation.
The default mode is continuous; it will
automatically start recording in this mode
when it is initially powered on.
1. Continuous Recording
A.
Make sure a micro SD card is inserted &
the LC500W is plugged in & slide the power
switch to the ON position.
B.
The lamp will flash red & green twice &
then turn off. The camera will rotate back
& forth indicating it is in the setup process.
