5
Specifications
28 / 48
BAL_K32_K42_ST_EN_1V2_REC_121-006454613
5
Specifications
5.1
Environmental conditions
Temperature range
From -15 to +50° C
Humidity range
Up to 85% rel. humidity, not condensing
5.2
Electric specifications of the door
Mains voltage:
230 VAC
Frequency:
50-60 Hz
Nominal power:
max. 300 W
Mains fuse:
10A circuit breaker with tripping characteristic C or K
Control voltage:
24 VDC
Motor voltage:
48 VDC
Safety class:
1
Degree of protection:
IP 20
5.3
Electrical specifications power supply
Mains voltage
100-240 VAC, 50/60 Hz
Nominal power
See system nameplate
Fuse
16 A breaker with tripping characteristics C or K
Safety class
1
NOTICE
The power connection must be installed by a licensed electrician. One must be able to turn
the power supply off completely via a main switch or residual current circuit breaker.
5.4
Electrical specifications of the door control KST200
Type of control
1x KST200 Master
1x KST200 Slave
1x STM20 (if with night shield)
1x STM20 (For K22 with sliding door)
Up to 6x AST200 (Motor control) / Motor
Switching power supply for control voltage
100-240 VAC – 24 VDC / 200 W
(short-circuit proof)
Switching power supply for motor voltage
100-240 VAC – 48 VDC / 600 W (short-circuit proof)
Type of motor
DC motors 48 VDC
5.5
Electrical lighting specifications
High-Power LED-Spots
Mains connection Transformer
100-240 VAC
Frequency
50-60 Hz
Secondary transformer power
120 W
Output per luminaire/illuminant
4.5 W
Protection class / Insulation class
2
Transformer Degree of protection
IP 67
NOTICE
The power connection must be installed by a licensed electrician.
The power must be able to be shut off via a main switch or residual current circuit breaker
(on-site).
