background image

Safety

2

Feature Identification

3

Operation

4

Application Guide

5

Mounting

6

Battery Connection

7

AC Output Connection

(back page)

Troubleshooting/Service/
Maintenance/Warranty

(back page)

Warranty Registration

8

(back page)

Owner’s Manual

PowerVerter

®

Plus

DC-to-AC Inverters

Input

Output

12 VDC

120V, 60 Hz. AC

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

Copyright © 2005. PowerVerter

®

is a registered trademark of Tripp Lite. All rights reserved.

* Inverters are moisture-resistant, not waterproof.

Contents

Reliable AC Power Wherever You Need It!

Congratulations! You’ve purchased the most advanced, feature-rich
Inverter designed as a mobile energy source for your vehicle.
PowerVerter Inverters efficiently convert DC (battery) power into
120V AC (household) power, allowing you to use equipment you
commonly use at home—appliances, entertainment systems, computers,
power tools and more—while cruising the open road. PowerVerter
Inverters, through a high-efficiency conversion process and a charge
conservation setting, draw the highest level of performance from your
batteries without overtaxing them, lengthening their service life. An
automatic low battery shutdown feature ensures you'll always have
plenty of power for starting purposes.

• Automatic Overload Protection

• Automatic “Battery-Saver” Low Voltage Shutdown

• High Efficiency DC-to-AC Inversion

• Multi-Function Lights & Switches

• Optional Remote Control Capability

• Frequency-Controlled Output

• Moisture-Resistant Construction*

• Battery Charge Conserver (Load Sense)

W

arranty 

Registration

Register online toda

y f

or a 

chance to win a FREE 

Tr

ipp Lite product!

www

.tr

ipplite

.com/w

arr

anty

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series number. The series number can be found on
the product nameplate label, along with all required approval markings and information. When requesting compliance information for this product, always refer to the series number.
The series number should not be confused with the marking name or model number of the product.

* Applies to models with "UL" in their model numbers.

Summary of Contents for Welding System









Reviews: