Malfunctions
7
BAL_C127_X_SU_H-B_OFFSET_EN_1V1_REC_121-006454632
29 / 32
Back to main display by pressing the key or automatically after 20 seconds.
NOTICE
You will find the detailed description of the error numbers and remedial actions in Book B8A
102-020401150.
7.2
Resetting the control module
In some cases, the malfunction may be remedied by restarting the control unit. Please proceed as de-
scribed below.
– Make sure that the drive cladding is closed and that nobody is obstructing the system or ap-
proaching it, thereby triggering an opening of the system.
Button
Selection
Display
Press > 5 seconds
No
Yes
– Restart of the installation is performed.
– The first movement after a reset occurs at reduced speed.
– If a fault is still displayed on the control unit after resetting, please contact our service centre
stat-
ing the error message
.
7.3
Control unit BDE-D does not react
If the control panel does not react when the keys are pressed or if no message appears on the dis-
play, a reset of the control panel could eliminate the problem.
Proceed as follows:
RESET HARDWARE BDE-D
Press E key > 12 seconds
Display without any message
