Description
3
BAL_C127-SU-S_EN_1V1_REC_121-127401297
17 / 34
3.5.4
Damping washer, splined hub and tubular spacer
– Used as a spacer for the support surface of the standard or sliding lever in the case of axis exten-
sions
– Damping washer, 3 mm thick, for small gaps or fine adjustment.
– Splined hub, 25 mm long, 40 mm diameter, black, for larger gaps.
– Tubular spacer, aluminium, 75 mm long, 40 mm diameter, painted black, can be cut to length in 5
mm steps.
Damping washer
Splined hub
Tubular spacer
Art. No. 102-127111070
Art. No. 102-127111136
Art. No. 102-127116168
3.5.5
Base plate
– Stainless steel plate for placing on the finished floor.
– Material thickness 2 mm, polished in longitudinal direction with grain size 240
– Wedge is screwed to the base plate.
– Attached to the drive with 8 countersunk bolts M5x30.
– Support the base plate with shims (A) on the drive housing in case of heavy usage.
Base plate type S
Art. No. 102-127809044
CAUTION
Danger of slipping if the surface is wet or dirty.
Persons can injure themselves if they slip or fall.
a) Attach sufficient anti-slip strips, e.g. with slip resistance R13 in acc. with EN 13552.
