3
Description
16 / 34
BAL_C127-SU-S_EN_1V1_REC_121-127401297
3.5.2
Sliding lever GG
– The door leaf must be fastened to the frame with hinges.
– Suitable for pulling and pushing applications.
– The slide rail can be installed in the door panel or bottom rail profile of the door leaf.
– An adjustable mechanical stop is integrated in the slide rail.
– The spigot shaft 10 is also available in lengths of 18 and 25 mm.
Sliding lever GG C127
Art. No. 102-127809028
3.5.3
Spline shaft extensions
These are used as axis extension units to compensate for height differences between the drive and
the lever connection on the door leaf.
An extension of 25 mm is integrated in the drive at the factory.
Lever type
Spline shaft exten-
sion 25
Spline shaft exten-
sion 50
Spline shaft exten-
sion 75
Spline shaft exten-
sion 100
(Dimensions in mm)
102-127115502
102-127115503
102-127115614
102-127115416
Standard lever
a
15
40
65
90
b
20
45
70
95
c
16
41
66
91
