Taking out of service and disposal
8
BAL_C127-SU_OFFSET_EN_1V0_REC_121-006454770
31 / 32
8
Taking out of service and disposal
8.1
Decommissioning
When shutting down or taking out of service, the system is disconnected from the mains supply and
any existing battery is unplugged.
NOTICE
After each temporary shutdown a new commissioning must be carried out.
8.2
Dismantling and disposal
IMPORTANT
All machine parts must be sorted by type of material and disposed of according to
local regulations and guidelines.
NOTICE
The door systems can be completely disassembled in reverse order.
The automatic door mainly consists of the following materials:
Aluminum:
– Linking profiles
– Gearbox, Drive panel
– Door wing profiles and side profiles
– Various profiles and small parts
Steel / iron parts:
– Stainless steel casing, Floor panel, Box recess for floor installation
– Optional spacer or reinforcement profiles
– Gear components, springs
– Various small parts like fittings, covers, linking parts, etc.
Glass:
– Door wings and side panels
Various electronic and electromechanical components:
– Sensors, control and operator components
– Lead batteries and nickel-cadmium rechargeable batteries
Various plastics:
– Rollers
– Cable clips, coupling and linking parts
– Sealing profiles
– Casing of electromechanical components and sensors
