Record Power RSBG6 Original Instruction Manual Download Page 10

Original Instruction Manual   |   

RSBG6 & RSBG8 

Bench Grinders   |   Version 2.0   |   August 2012

5. Record Power Guarantee

10

Products

” means the Products sold by Record Power subject to 

these terms and conditions;

Record Power

” is Record Power Limited, whose company 

registration number is 4804158 and registered office address is Unit 
B, Ireland Industrial Estate, Adelphi Way, Staveley, Chesterfield, S43 
3LS and sells through a network of Authorised Dealers;

Authorised Distributor

” is the nominated importer for your 

region who will generally sell through a network of Authorised 
Dealers.  Details of Authorised Distributors for specific countries can 
be found in the Product manual or at www.recordpower.info;

Authorised Dealer

” is a retailer or business authorised to sell 

Record Power Products to end users. 

Guarantee 

1.1

    Record Power guarantees that for a period of 5 years from 

the date of purchase the components of qualifying Products 
(see clauses 1.2.1 to 1.2.9) will be free from defects caused by 
faulty construction or manufacture.

1.2

    During this period Record Power, its Authorised Distributor 

or Authorised Dealer will repair or replace free of charge 
any parts which are proved to be faulty in accordance with 
paragraphs 1.1 above provided that:

1.2.1

  you follow the claims procedure set out in clause 2 below;

1.2.2

   Record Power, our Authorised Distributor or Authorised Dealer 

are given a reasonable opportunity after receiving notice of the 
claim to examine the Product;

1.2.3

   if asked to do so by Record Power, its Authorised Distributor or 

Authorised Dealer, you return the Product, at your own cost, 
to Record Power's premises or other approved premises such 
as those of the Authorised Distributor or supplying Authorised 
Dealer, for the examination to take place;

1.2.4

   the fault in question is not caused by industrial use, accidental 

damage, fair wear and tear, wilful damage, neglect, incorrect 
electrical connection, abnormal working conditions, failure to 
follow our instructions, misuse, or alteration or repair of the 
Product without our approval;

1.2.5

   the Product has been used in a domestic environment only;

1.2.6

   the fault does not relate to consumable Products such as 

blades, bearings, drive belts or other wearing parts which can 
reasonably be expected to wear at different rates depending 
on usage (for full details contact Record Power or your local 
Authorised Distributor);

1.2.7

    the Product has not been used for hire purposes, by you or by 

a previous owner;

1.2.8

   the Product has been purchased by you as the guarantee is not 

transferable from a private sale.  

1.2.9

   where the Product has been purchased from a retailer,  the 5 

year guarantee is transferable and begins on the date of the 
first purchase of the Product and in the event of a claim under 
this guarantee proof of the original purchase date will be 
required to validate the warranty period.

Claims Procedure

2.1

    In the first instance please contact the Authorised Dealer who 

supplied the Product to you. In our experience many initial 
problems with machines that are thought to be due to faulty 
parts are actually solved by correct setting up or adjustment 
of the machines. A good Authorised Dealer should be able to 
resolve the majority of these issues much more quickly than 
processing a claim under the guarantee.

2.2

    Any damage to the Product resulting in a potential claim under 

the guarantee must be reported to the Authorised Dealer from 
which it was purchased within 48 hours of receipt.

2.3

    If the Authorised Dealer who supplied the Product to you has 

been unable to satisfy your query, any claim made under this 
Guarantee should be made directly to Record Power or its 
Authorised Distributor (for details of the Authorised Distributor 
in your country please see your Product manual or check 
www.recordpower.info for details). The claim itself should be 
made in a letter setting out the date and place of purchase, 
and giving a brief explanation of the problem which has led 
to the claim. This letter should then be sent with proof of the 
purchase date (preferably a receipt) to Record Power or its 
Authorised Distributor. If you include a phone number or email 
address this will help to speed up your claim.

2.4

   Please note that it is essential that the letter of claim reaches 

Record Power or its Authorised Distributor on the last day of 
this Guarantee at the latest. Late claims will not be considered.

Limitation of Liability 

3.1

    We only supply Products for domestic and private use.  You 

agree not to use the Product for any commercial, business or 
re-sale purposes and we have no liability to you for any loss of 
profit, loss of business, business interruption or loss of  
business opportunity.

3.2

   This Guarantee does not confer any rights other than those 

expressly set out above and does not cover any claims for 
consequential loss or damage. This Guarantee is offered as an 
extra benefit and does not affect your statutory rights  
as a consumer.

Notice 

 

 

This Guarantee applies to all Products purchased from an 
Authorised Dealer of Record Power within the United Kingdom 
of Great Britain and Northern Ireland. Terms of Guarantee may 
vary in other countries – please check with the Authorised 
Distributor in your country (details of the Authorised Distributor 
for your country can be found in the manual or at www.
recordpower.info).

Summary of Contents for RSBG6





















Reviews: