8
7. Assembly
The column, column support and rack are supplied preassembled. To
secure to the base, align the four holes in the support casting with the
corresponding holes in the base and secure using four M10 x 20 mm hex
head screws
(Fig. 7.1)
. The rack should be positioned to the right of the
column (looking from the front of the machine) to ensure the table will be
at the front of the machine when fitted.
Fit the table locking handle to the rear of the table support. Note that one
side of the table support has a plain bore and the other a tapped hole.
Ensure that the locking handle is passed through the plain bore and into
the tapped hole in order for the table support to clamp correctly around the
column
(Fig 7.2)
.
Fit the table crank handle to the shaft protruding from the table support
and secure using the M6 x 8 mm blind set screw
(Fig. 7.3)
.
Attach the table to the table support by placing the column on the
underside of the table through the hole at the front of the table support
(Fig. 7.4)
. Secure in place by tightening the table locking lever.
Fig. 7.1
Fig. 7.2
i
Kg
i
Kg
Caution: Many of the items are very heavy. We recommend that
assistance is sought before trying to lift the larger components.
Fig. 7.3
Blind set screw
Table crank handle
Fig. 7.4
Table locking lever
Table