8
5. Machine Description & Technical Specifications
MACHINE IDENTIFICATION
There is a plastic identification plate fixed to the machine, containing the specifications and serial number.
GETTING TO KNOW YOUR MACHINE
1
Lifting handle
2
Handwheel
3
Face plate
4
4 prong drive centre
5
Tool rest
6
Revolving centre
7
Tailstock
8
Tailstock handwheel
9
Tailstock spindle locking arm
10 Tool rest base
11 Tool holder
12 Motor
13 Lathe bed
14 Tailstock locking lever
15 Switch and speed control unit
16 Tool rest base locking lever
17 Indexing lock
18 4 mm Allen key
19 Spanner
20 2 x screw and washers for tool holder
21 Knock out bar
22 Tool holder
2
1
3
4
5
6
7
8
9
10
11
12
13
14
17
16
15
SPECIFICATIONS
Swing over bed:
305 mm
Swing over tool rest base:
240 mm
Working distance between centres:
406 mm
Motor:
230V / 50 Hz, 1/2 hp / 375 W
Full load current:
4.6 A
Speed ranges:
170-1170, 290-2040, 540-3840rpm
Thread:
3/4” x 16 TPI or M33 x 3.5 mm (please refer to machine specification label)
Taper:
1 or 2 Morse Taper (please refer to machine specification label)
Hole through spindle:
9.5 mm
Tailstock spindle travel:
63.5 mm
Noise Emission:
Sound power level < 83 dB (A)
Sound pressure level < 83 dB (A)
18
19
20
21
22
DML305-VS Manual 3.0.indd 8
19/09/2013 11:13
