1.
Assembly
Instructions
2.
Usage &
Application
fig.1
fig.4
fig.2
fig.3
Positioning & Adjustment
The most comfortable position for turning a particular
workpiece can be obtained not only by adjusting the various
components of the end turning unit but also by swivelling the
headstock to the optimum angle and by adjusting its position
along the bed bars. See
fig.3
for a typical arrangement of the
bowl rest.
Fitting The Bracket To The Lathe
To assemble the unit, simply remove the end bracket at the
headstock end of the machine and fix the turning bracket in
its place. Then assemble the swivel bracket as shown in
fig.1
& fig.2.
This unit can be left on the machine when turning
between centres etc.
Normal Duty work
For normal duty work the swivel bracket clamping screw is
sufficient to secure the swivel bracket in position but if movement
is anticipated then the swivel bracket secondary screw should
also be tightened.
fig.4
.
Thin work
For thin work the headstock can be swivelled to give maximum
clearance for the turning tool handle
fig.5
.
fig.6
fig.5
Heavy Duty Work
For exceptionally heavy duty work the end bracket from the
standard machine can be inocorporated
fig.6
. The following extra
parts will be required for this application:
M12 nut
(ZABX)
Bolt
(ZABM)
Washer
(ZABO)
Cast washer
(ZED)
Angle strap
(ZIF)
Summary of Contents for cl3b
Page 3: ...3 Parts Diagrams ...