43
Fig.21.3
Fig.21.4
7. Assemble the second leg sub-assembly to the end rails (
4
and
17
) using
fasteners (
9
,
11
and
12
).
8. Attach the two top plates (
3
) onto the legs (
1
and
2
) using the fasteners
(
10
,
11
and
12
) in the corresponding holes in the leg tops.
9. Finally, fully tighten all nuts and bolts.
10. If the bench needs to be lengthened or shortened to suit a different
Record Power lathe, this can be done by unscrewing the 8 M10 bolts (
14
),
extending or retracting the bench, re-aligning the bolts (
14
) with the
required holes in the inside rail and then fully re-tighten.
21. RPLB24-48 Assembly - cont.
Summary of Contents for CL3-CAM
Page 20: ...20 6 Assembly Instructions cont Fig 6 46 Fig 6 47 ...
Page 35: ...35 13 Spare Part Identification VSLK for CL4 CAM only ...
Page 46: ...46 ...
Page 47: ...47 ...
