6
1. Professional Engraver for heavy work and continuous use.
2. Easy release universal chuck for quick changeover of accessories.
3. A2 extra-fine solid carbide point.
4. A4 Carbide tipped point.
5. Abrasive point A8 for obtaining a lace-like effect on glass.
6. A5 point for engraving softer materials such as alloys.
4. Contents of the Kit
5. Specifications
Strokes per second:
100
Voltage:
7417070
230V
50Hz
7418046 - EP
230V
50Hz
7417070 - AUS
240V
50Hz
7417087
110V
50Hz
6. Noise and Vibration Information
(Measured in Accordance With En 60745):
Typical A-weighted sound power level
LpA : 72.7 dB(A)
Typical A-weighted emission sound pressure level LWA : 83.7 dB(A)
Uncertainty for the given sound level
3 dB (A)
Vibration Value:
20.32 m/s2
Uncertainty (K):
1.5 m/s2
Recommendation to wear hearing protection.
The vibration emission level given in this information sheet has been measured in accordance with a
standardised test given in EN 60745 and may be used to compare one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure.
Warning
The vibration emission during actual use of the power tool can differ from the declared total
value depending on the ways in which the tool is used; and
Warning
The need to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as
the times when the tool is switched off and when it is running idle in addition to the trigger time).
3
5
6
2
1
4
i
Kg
Engraver Manual 3.4.indd 6
02/06/2014 10:25
