background image

6

intended function.

•   Check for alignment of moving parts, binding of moving parts, breakage 

of parts and any other conditions that may affect the operation of the 
machine.

•   A guard or other part that is damaged should be properly repaired 

or replaced by a qualified person unless otherwise indicated in this 
instruction manual. 

•   Do not use the machine if the switch does not turn the machine ‘ON’ and 

‘OFF’.

•  Have defective switches replaced by a qualified person.

31. Warning!

 

•   The use of any accessory or attachment, other than those recommended 

in this instruction manual, or recommended by our Company may present 
a risk of personal injury or damage to the machine and invalidation of 
the warranty.

32. Have your machine repaired by a qualified person 

•   This machine complies with the relevant safety rules and standards 

appropriate to its type when used in accordance with these instructions 
and with all of the standard safety guards and equipment in place. Only 
qualified persons using original spare parts should carry out repairs. 
Failure to do this may result in considerable danger to the user and 
invalidation of warranty.

33. Caution! Motor may become hot during use

 

•  It is normal for motors on some machines to become hot to the touch 

during use. Avoid touching the motor directly when in use.

2. General Health and Safety Guidance

Summary of Contents for 71800





















Reviews: