Silent Image Fact Sheet – April 2006
The default (and minimum recommended) number of pictures to take in a NearVideo sequence is
three, but you can adjust the number of pictures taken after a trigger from 1 to 99.
The default time that the camera waits between pictures is one second, but you can adjust the
time that the camera waits between pictures from 0.2 to 60 seconds. If you select the option to
take RapidFire pictures, the camera will take pictures as fast as it can save them to the CF card
(this speed may vary depending on the type of card you’re using; see
CompactFlash
®
(CF)
Cards
). Fast cards can save up to five frames per second.
There is also a 24 hour trigger schedule that allows you to tell the camera when to “look” for
motion events (
Camera on
), and when to ignore motion events (
Camera off
). The schedule is
subdivided into half hour segments.
Copyright RECONYX, LLP – www.silent-image.com
Changing The Camera Settings - 11
