Reconyx RapidFire, Instruction Manual

Page: 14 / 28

1. Motion Sensor – ON , off
2. Sensitivity - low, low/medium, medium, medium/high, High, or
VERY HIGH
3. Pics Per Trigger – 1, 2, 3 , 5, or 10
4. Picture Interval – RapidFire, 1 SEC , 3 sec, 5 sec, or 10 sec
(SM70 defaults to RapidFire interval)
5. Quiet Period – NO DELAY , 15 sec, 30 sec, 1 min, or 5 min
Note : You can use the Scheduling Software to schedule which days of the
week and times of day when you want the camera to respond to trigger
events. Refer to the Scheduling Software Help file for more information.
Time Lapse – Use this option to control your cameras time lapse
photography, select the starting and ending times, and the interval between
pictures taken.
1. AM Period – on, OFF
2. PM Period – on, OFF
3. Time Lapse starting and ending times – one hour increments
4. Interval between pictures – 1, 5, 15, or 30 minutes, 1 hour
Note : Time Lapse functionality can also be scheduled using the Scheduling
Software.
Images – Use this option to adjust the night time exposure, set the
resolution, and the temperature scale.

Night Mode – DEFAULT , high quality, fast shutter, Max Range
(Do not change this setting when using for license plate capture)
i. Default - best combination to balance image quality, shutter
speed and flash range
ii. High Quality - higher quality images, reduced flash range
iii. Fast Shutter - reduced motion blur, reduced flash range
iv. Max Range – increased range, reduced image quality