manualshive.com logo in svg

ReconRobotics THROWBOT 2, User Manual, Page: 14 / 36

Share
Download
ReconRobotics THROWBOT 2 User Manual Download Page 14

14

OCU CHARGING

GENERAL CHARGING GUIDELINES

1.  Ensure the robot and OCU are off before charging.
2.  Plug the AC electrical cord into charger and plug 

charger into the power source before charging.

3.  Prior to charging ensure the charge plugs and 

receptacles are dry, debris free, and not damaged. 
If anything appears damaged, contact support@
reconrobotics.com for assistance.

4.  Fully insert the appropriate charger cord into the 

OCU and robot. Do not force a connection. Ensure 
connecting plugs are not bent during insertion or 
removal.

5.  Remove robot and OCU from charger when charging 

is complete or keep everything connected to trickle 
charge and maintain a full battery. Charge your 
robot and OCU at least once per month to ensure 
the batteries are kept topped off to be ready for 
immediate deployment.

6.  Always charge in a cool, ventilated, and fire- 

safe area.

7.  Do not leave items charging unattended.
8.  After charging, make sure that the Throwbot 2 robot’s 

charge jack dust cover is in place over the charge jack.

9.  If there is an unusual sound, smoke, or burning odor 

emitted from any of the components during charging, 
discontinue charging, unplug the equipment and 
contact [email protected] for assistance.

The OCU comes with a dedicated charger.  

NOTE: Only use the supplied OCU charger with the OCU. 

Blinking

Fully 

charged

OR

No device 

plugged In

Charging

No Power

Charger is not 

working properly. 

Please contact 

support@ 

reconrobotics.com

Summary of Contents for THROWBOT 2





































Reviews:

No comments