Installing the iPad Mount and App
Recon Blockage Plus
™ Installation Manual
600840-000069, rev 1.0
Page 28 of 35
Connecting to the Gateway
1. Make sure
that you have power to the gateway. The gateway’s LED is green when it’s
done booting.
2. Tap the
Settings
i
con on your iPad’s home screen.
3. Tap
Wi-Fi
. Then, connect to the
Gateway-XXXXXX
network (if it’s your first time using
the system) or the
IASBlockage
network
“XXXXXX” represents the gateway’s serial number.
4. Open the Recon Blockage Plus
app from the iPad’s Home screen. Follow the on-screen
prompts to begin configuring your system
For instructions to configure and use Recon Blockage Plus
™ after installation, see the Recon
Blockage Plus
Operator’s Guide (600890-000015) from the app’s Manuals screen.
