background image

Page 12

 

 

 
THE CUSTOMER ACKNOWLEDGES AND AGREES THAT RECON OUTDOORS SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES 
THAT  THE  CUSTOMER  MAY  INCUR  FROM  DELAYED  SHIPMENT,  PRODUCT  FAILURE,  PRODUCT  DESIGN,  SELECTION,  OR 
PRODUCTION  OR  FROM  ANY  OTHER  CAUSE,  WHETHER  LIABILITY  IS  ASSERTED  IN  CONTRACT,  TORT  (INCLUDING 
NEGLIGENCE  AND  STRICT  PRODUCT  LIABILITY)  OR  OTHERWISE.  IN  NO  EVENT  SHALL  RECON  OUTDOORS  BE  LIABLE  FOR 
ANY  INDIRECT,  INCIDENTAL,  CONSEQUENTIAL  OR  SPECIAL  DAMAGES  OF  ANY  KIND  (INCLUDING  WITHOUT  LIMITATION 
LOSS  OF  PROFITS  OR  LOSS  OF  USE),  WHETHER  OR  NOT  RECON  OUTDOORS  SHALL  BE  OR  SHOULD  BE  AWARE  OF  THE 
POSSIBILITY OF SUCH POTENTIAL LOSS OR DAMAGE. 
 

Representations and warranties made by any person, including but not limited to dealers, representatives, salespersons, or 
agents of Recon Outdoors, which are inconsistent or in conflict with or in addition to the terms of this limited warranty, shall 
not be binding upon Recon Outdoors unless reduced to writing and approved by an expressly authorized officer of Recon 
Outdoors. 

 
This limited warranty is the complete and exclusive statement of warranty which Recon Outdoors agrees to provide with 
respect to the Products and it shall supersede all prior and contemporaneous oral or written agreements, understandings, 
proposals, and communications pertaining to the subject matter hereof. This limited warranty is exclusively for the benefit 
of the original customer and cannot be transferred or assigned. 

 

9.0  Service and Returns 

 
When eligible service is needed, package the Product carefully using ample padding material to prevent 
damage in transit and ship it postage prepaid and insured to the Recon Outdoors Service Center at:      

            
                           Recon Outdoors 
 

Attention:  Camera Service Center 
2102-A West Ferry Way, SW 
Huntsville, Alabama    35801 

 
When returning Products for service, your package must include the following: 

 

1.

 

Original sales receipt showing date and place of purchase.  
         This will be required for in-warranty service. 

2.

 

A detailed description of the problem. 

3.

 

A contact name, telephone number and email address. 

4.

 

Owner’s name and street address where repaired camera is to be shipped. 

 
 
 

Summary of Contents for HS100 Series














Reviews: