User Manual for Mobile DVR
9
2
Specifications
Function Item
Description
Channel 1-4
channels
Resolution
Support CIF
、
HD1
、
D1 resolution, compatible with 2CH of D1 & 2CH of CIF. fps:
1 to 25f/s/ch adjustable (PAL) or 30f/s/ch (NTSC) .
Video Quality
1-4 levels, 1 is the highest level and 4 is the lowest level.
OSD
Overlays information such as date time and vehicle ID
SD card REC
Support two SD card recycle recording. Automatically switch to the other one
when the first SD card was full, and the data will be automatically overwritten .
Recording Mode
The default setting is auto recording after power on. Timed recording and alarm
recording are supported.
Preview
Support 1 channel and 4 channels preview.
Recording
System
Disk Data
overwritten
Support SD cards overwritten function.
Video Search
Search video files anytime per day, type(n/a) and target SD card.
Support 1 to 4 channels playback.
Playback
System Playback
Support forward and backword play
at the speed of: x 2,x4,x8,x16.
GUI
Graphical User
Interface
Setup system parameters with the remote control.
Support up to 4 channels alarm input.
Input
Pre-record 15 seconds ahead of the alarm.
Record duration after alarm can be set in system
Alarm
Output
Support up to 2 channels alarm output, level signal.
GPS
GPS module can be built-in device M603B, the GPS info will be recorded
synchronous
RJ45 Ethernet port.
Network
M603B supports several wireless modules such as 3G and WIFI
Optional
Function
G Sensor
Built in G-sensor is available with M603B
Power Settings
System auto power on/off:
1,Vehicle acc on/off---system auto power on after acc on, system power off
according to the delay time (up to 240min, default 5min) after acc off.
2,Preset time---Only according to time preset table.
Others
Power-off
protection
With the power-off protection, all data can be saved safely and the recording can
be closed normally after power failure.
RECODA
