Assembly
Completing the forestay (R5 – R7)
27
Shorten one of the standard furling sections by the offcut measurement 'C' using a handsaw.
The shortened furling section will become the top furling section during assembly.
Pos: 36 /ZINDEL/Rollreffanlagen/Montage/Alu/R50, R5 - R8/Topkappe vorbereiten (R50, R5 - R8) @ 1\mod_1399617358756_13349.docx @ 13906 @ 3 @ 1
5.2.4 Preparing the top bushing (R5 – R7)
After assembly the top bushing will cover the top furling section.
The following can be used as a top furling section:
•
a shortened standard furling section, i.e. a furling section that is less than 5980 mm long,
•
if furling section shortening is not necessary, a standard furling section of length 5980 mm.
1. Insert the two halves of the top bushing into the top furling section in such a way that the join
line formed by their mating surfaces is lined up with the groove in the furling section.
If
the
furling section has been shortened, insert the top bushing into the shortened side.
Summary of Contents for RF90
Page 4: ...Notes www reckmann com ...
Page 74: ...Notes 70 ...
