223553 / 9160625310
2018-05-24·BA00·III·en·04
Mounting and Installation
15
Transmitter power supply
N-132...IL
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
8.2.2 Mounting / Dismounting Pluggable Terminals
Mounting
• Plug the terminal into the device until the terminal engages.
Dismounting
8.3
Installation
8.3.1 Electrical Connections
8.3.2 Schematic Diagrams
See device labelling.
Input wiring (blue terminals with pins 10, 11, 12 and 13, 14, 15):
10859E00
• Position the screwdriver behind the terminal.
• Push out the terminal.
DANGER
Explosion hazard caused by voltage that is too high!
Non-compliance results in severe or fatal injuries.
• Connect the device only to equipment with internal voltage U
m
:
max. 253 V AC / 50 Hz.
• Connect the device only to intrinsically safe terminals.
DANGER
Explosion hazard due to incorrect safety characteristic values of the
device or connected field devices!
Non-compliance results in severe or fatal injuries.
• Check safety characteristic values of the device and connected
field devices according to the national installation guidelines.
2-wire transmitter
3-wire transmitter
Channel 2
06980E00
06979E00
Channel 1
06976E00
06977E00
13+
14
+
0/4 ... 20 mA
13+
14
15-
10
12+
+
0/4 ... 20 mA
10
11-
12+
