REBOTEC /
BA-Nr.: 02.07.082/2021-11-A01
- 6 -
EN
N
well as the intended use, are a basic prerequisite.
The statutory warranty provisions shall apply.
•
Unauthorised modifications to this product will void
the product’s conformity and the warranty.
6.1 Complaint
•
Please contact us before returning the product.
•
To reduce transport damage, use the original
packaging if possible.
•
The Infection Protection Act must be complied
with.
Please make sure that the product does not
pose a risk of infection when returned.
Enclose the information sheet on safety with the
product.
Costs may incur for returns that are not marked
non-objectionable.
7 Reuse, lifetime
•
The product is suitable for reuse. How often the
product can be reused depends on the frequency
and nature of use.
•
Before reuse, the product must be reprocessed hy-
gienically and the technical and functional safety
and reliability of the product must be checked and
restored if necessary. See 13.
For more detailed information, please see the
reprocessing instructions (02.12.156) and the
maintenance instructions (02.11.150).
The documents can be downloaded from the fol-
lowing link.
▪
•
If the product is used as intended, its lifetime is 5
years. The effective lifetime may vary depending
on the frequency and intensity of use and the gen-
eral condition.
8 Scope of delivery
1x shower / toilet wheelchair
1x toilet bucket
1x Allen key
•
1x user manual (02.07.082)
•
1x maintenance instructions (02.11.150)
•
1x reprocessing instructions (02.12.156)
•
The reprocessing and maintenance instructions
can be ordered or viewed and downloaded at
9 Setting up for use
•
The product has been carefully inspected in the
factory for freedom from defects and complete-
ness. Please check the product for any possible
damage which may have occurred during transport
and for completeness of the scope of delivery upon
receipt. Assembly or adjustment shall be carried
out by the specialist dealer
9.1 Folding down the footrests
•
Turn (1) the footrests forwards until they engage
automatically. Fold (2) the footrests down. Adjust
the height of the footrests if necessary.
9.2 Adjusting the footrest height
•
The footrest height can be adjusted in 7 positions.
Loosen and remove the screws on the side of the
footrest using an Allen key (SW 5). Select the ap-
propriate height level (1-7) and screw the footrest
back in place. Make sure that the screws are firmly
tightened!
9.3 Assembling the
backrest
•
Swivel the armrest
backwards, place the backrest on the tubes of the
chair frame and push it onto the base frame as far
as it will go.
•
Swivel the armrests forwards again so that they
engage in the groove on the backrest and with the
locking bolt in the base frame.
10 Product data
•
We reserve the right to make technical develop-
ments and improvements with respect to the de-
sign shown in this User Manual.
•
See 15.
1
2
Max
Min
