Rebel RB-1020 User Manual Download Page 5

26

EN

SAFETY INSTRUCTIONS

Read the enclosed safety warnings, the additional safety warnings and the instructions. 

Failure to follow the safety warnings and the instructions may result in electric shock, 

fire and/or serious injury. 

Save the safety warnings and the instructions for future reference.

The term „power tool” in the warnings refers to your mains-operated (corded) power tool or 

battery-operated (cordless) power tool.

Symbols

 

(Explanation of symbols appearing on the tool, if applicable)

Read the instructions manual.

Risk of injury and/or damage and/or deterioration of product in case of 

noncompliance to safety requirements.

Risk of electric shock.

Variable electronic speed.

Rotation, left/right.

Indoor use only.

In case of failure, the transformer is not dangerous.

Class II machine - Double insulation – You don’t need any earthed plug.

In case of failure, the transformer is not dangerous.
Do not expose to weather conditions.

Do not use in damp or wet areas.
Do not expose product to extreme temperatures (too hot or too cold environment).

Protect from exposure to direct sunlight.

Wear protective equipment: face mask, ear and eye protection.

Wear protective gloves and boots.

Keep all your body parts away from moving parts.

Keep persons (esp. children) and animals away from power tool and working area.

Summary of Contents for RB-1020




























Reviews: