PRODUCT DESCRIPTION
1. Display
2. ON/OFF button
3. Measurement hold button
4. Rotary switch
5. hFE terminal
6. Connection terminals
OPERATION
AC and DC measurement
1. Connect the red test lead to the VΩ terminal.
2. Connect the black test lead to the COM terminal.
3. Set the rotary switch to proper voltage range.
4. Connect the test leads to a measured circuit.
5. Turn on the circuits power. The voltage and polarization will
show on the display.
*If the range is not known, set the range to highest and
gradually lower it, until getting the accurate measurement.
AC and DC current measurement
1. Connect the red test lead to the VΩmA terminal. If the
measurement will be in 200 mA - 20 A range, connect the
red test lead to the 20 A terminal.
2. Connect the black test lead to the COM terminal.
3. Set the rotary switch to proper current range.
4. Open the measured circuit and connect the test leads in
series.
5. The result will appear on the display.
Caution: while connected to the 20 A terminal, measurements
can last only 15 seconds in a few seconds intervals.
Resistance measurement
1. Connect the red test lead to the VΩ terminal.
2. Connect the black test lead to the COM terminal.
3. Set the rotary switch to proper Ω range.
1
2
3
4
5
6
EN
12
Summary of Contents for MIE-RB-55
Page 1: ...TOOLS model MIE RB 55 USER S MANUAL DE EN PL RO DIGITAL MULTIMETER...
Page 2: ...DE 2...
Page 33: ...RO 33...
Page 34: ...www rebelelectro com...
