Rebel TOOLS MIE-RB-0003, User Manual

Page: 6 / 16

SAFETY INSTRUCTIONS
1. Before using the device, inspect the case for any
mechanical damage. If the case has cracks or is missing
any part, do not use the device.
2. Before measurement, set the proper mode of the device.
3. Do not use the device in temperatures exceeding the range in
specification, in high humidity, and near explosives and
flammables.
4. If the display shows low battery icon, change the batteries.
Otherwise the accuracy of measurements may be decreased.
5. Turn off the device before opening the battery
compartment cover.
6. Battery must be replaced with a new one and with the
same specification.
7. Do not tamper with devices internal circuits. This may lead
to measurement decrease or damaging the device.
8. The device is intended for indoors use only.
9. Take out the batteries, if the device is not going to be used
for a long time.
PRODUCT DESCRIPTION
1. Case notch
2. Low battery indicator
3. Detection sensitivity indicator
4. Wood detection mode
5. Metal detection mode
6. Voltage detection mode
7. Mode selection button
8. Turn on / calibrate button
OPERATION
Searching for wood, metals and live wires in a wall
1. Press and hold the turn on button. The display will show
last activated mode.
2. Press the mode selection button to choose the mode.
1
2
3
4 5 6
7
8
EN
6