8
CORE back panel overview
Following are descriptions of CoreReLation Phase Analyzer
’s back panel sections and controls.
1. Audio Jacks
CoreReLation Phase Analyzer includes the following audio jacks.
Audio In L&R
- Patch audio signals to process here.
Audio Out L&R
- These are the standard audio outputs.
Note: CORE should be connected as an “insert effect” in the signal chain to process the whole
channel signal, as opposed to a send effect where the effect balance is adjustable in the mixer.
2. Control Voltage (CV) Global Inputs
CoreReLation Phase Analyzer includes 2 global CV inputs to modulate the Global Pan Knob and Global
Width/HASS Effect Knob. You can attenuate these CV input signals with their corresponding attenuation
knob.
3. Control Voltage (CV) Channel Inputs
CoreReLation Phase Analyzer includes 4 channel CV inputs to modulate the independent Left and Right
Gain and Pan Knobs. You can attenuate any of these CV input signals with their corresponding
attenuation knob.
Note: The polarity buttons are used for defining the polarity of the CV input signals (unipolar or bipolar).
Set CV input to unipolar (button off) if you have
connected a CV signal from an envelope
generator such as our
SCRE
.
Set CV input to bipolar (button on) if you have
connected a CV signal from a standard low-
frequency oscillation (LFO) such as our
SCRE
.
Unipolar (button off) is the default setting when a new CORE is created.
