Rear view safety RVS-96D, Installation And Setup Manual

Page: 52 / 84

RVS-96D
Installation and Setup Guide
COPYRIGHT © 2017 Rear View Safety
52
1.
2.
3.
4.
a.
The Motion Detection menu enables you to set motion detection properties for each of the
six channels, which are selectable from the channel pull-down menu.
After you select a channel from the menu, you can apply properties for that channel as
described in the following steps.
Enable Status: use the check box to enable and disable motion detection.
Select the alarm delay (in seconds) by pressing in the field and using the numeric keypad.
press when done. Enter
Alarm delay is the length of time the alarm channel displays in full-screen mode and with a
recorder.
Set detection region(s) for the channel: