Rear view safety RVS-8129900Q, Instruction Manual

Page: 5 / 32

Reverse With Confidence ™
5
• Electric shock or product
malfunction may occur if this
product is installed
incorrectly.
• Use this product within
the voltage range specified. Failure
to do so can cause
electronic shock or product
malfunction.
• Take special care when
cleaning the monitor.
• Make sure to firmly affix the prod-
uct before use.
• If smoke or a burning smell
is detected, disconnect the
system immediately.
• Cover the power cable with fric-
tion tape where it may touch a
metal case. A short circuit
or disconnected wire may cause a
fire.
• While installing the Rear View
System be careful with the wire
positioning in order to avoid wire
damage.
• The Rear View System should only
be used when the vehicle is in
reverse.
• Do not watch movies or
operate the monitor while driving;
as it may cause an
accident.
• Do not install the monitor
where it may obstruct drivers
view or obstruct an air bag
device.
• Dropping the unit may cause
possible mechanical failure.
INSTALLATION:
SAFET
Y INF
ORMA
TION