REAR VIEW SAFETY
6
INSTALLATION
•
Electric shock or product
malfunction may occur if
this product is installed
incorrectly.
•
Use this product within
the voltage range specified.
Failure to do so can cause
electronic shock or product
malfunction.
•
Take special care when
cleaning the monitor.
•
Make sure to firmly affix the
product before use.
•
If smoke or a burning smell
is detected, disconnect the
system immediately.
•
Where the power cable may
touch a metal case, cover the
cable with a friction tape. A
short circuit or disconnected
wire may cause a fire.
•
While installing the Rear
View System be careful with
the wire positioning in order
to avoid wire damage.
•
The Rear View System should
only be used when the
vehicle is in reverse.
•
Do not watch movies or
operate the monitor while
driving; as it may cause an
accident.
•
Do not install the monitor
where it may obstruct drivers
view or obstruct an air bag
device.
•
Dropping the unit may cause
possible mechanical failure.
Safety Information
