3
Installation Instructions
Reverse With Confidence
™
5.3 Cable connection Instructions:
Red to back light +12
Red to back light +12
Black to GND
Black to GND
Note:
Before installing system let the components of the exhaust system cool down. This will make the
installation safer and preclude heat damage to the backup sensor wiring or components.
5.3 Installation Instructions:
Monitor:
- Attach the monitor to the dash with the 3M
sticker.
- Connect the wireless transmitter to the YELLOW
RCA input labeled AV2 and
connect the power wires on the monitor to a
12V power source. If it is connected to AV1 the
sensors will not appear on the monitor.
Camera:
- Use a screwdriver to remove the screws of the
licence plate. Line up the screw holes on the camera
with the holes on the license plate and attach the
camera using the license plate screws.
- Plug the anti-dismounting cap into the screw
hole.
Option A
Back Light
Sensors
Camera
Sensors
Option B
Display
Summary of Contents for RVS-5350
Page 1: ...1 TM ...
Page 11: ...11 Reverse With Confidence ...
