Rear View Safety
8
BEF
ORE
YOU
B
EGIN
1. This monitor is high voltage. Only professionals should open the
monitor's case.
2. Do not watch the video while driving unless you are monitoring the
rear view camera display.
Warning!
System Introduction
This system has three video inputs: one wireless and two wired.
Press the power button to turn the monitor on. Press "MENU" to ac-
cess main menu. Use the arrow keys to navigate the menu and use the
"MENU" button to confirm your selection. To toggle back a screen
press the"REV" button.
Instant Pair
1. Short press on monitor MENU to enter MENU
2. Short press PAIRING to begin pairing process
3. Cycle power on camera
4. System will pair automatically - Make sure to cycle camera power
after starting pairing process
Note
: Make sure the antenna on the monitor is installed straight up,
not to either side.
RVS-355W.indd 8
10/2/2017 3:33:33 PM
