Rear View Safety
8
Product Picture & Function
c) Power Supply
Plug the camera charger into the cigarette lighter in vehicle and start en-
gine. The device will automatically power on and start recording.
Note:
There are two Mini USB ports, one is on the device, another is on the
camera mount. If you connect the car charger to the Mini USB port on the
device, the power supply will be to device only. If you connect the car
charger with Mini USB port on the camera mount, the power supply will be
to the device and to the GPS/Speed camera detector. So, if you want to use
the GPS/Speed Camera Detector Module, the car charger needs to be
plugged into the mini USB port on the camera mount.
d) G-Sensor Function
The G-sensor will detect any abrupt movements or stops to the vehicle.
When it senses a sudden stop or an impact on the vehicle, it will activate
"protection mode". This will protect the video files from being over-written
by the loop-recording, saving the most important video.
