3
Connect Unit to Power Source
Plug the power cord into a standard 120V AC wall socket.
Setting the Clock
a) To adjust the time for Daylight Saving Time, slide the
DST switch
located on the rear of the unit to +1 to advance the time
1 hour. Slide to -1 to turn the clock back 1 hour.
b) Press and hold the
Clock Set Button
on the rear of the unit until the clock display flashes.
c) Press the
+
or
–
Button
as needed to adjust the display to the current time (hold for rapid setting). AM and PM indicators
appear at the bottom of the display. Make sure you set the clock to the correct AM or PM time.
d) Press the
Clock Set Button
again to confirm the time setting. Two beeps will indicate clock setting is complete
Using the Alarms
The unit has two independent alarms. Each can be set to wake you at separate times to the current radio station or to a buzzer
alarm.
Note:
Alarm 1 and Alarm 2 are set the same way;
Alarm Button
below means the button (Alarm 1 or Alarm 2) for whichever
alarm you are setting.
Setting the Alarms
a) Press and hold the
Alarm 1
or
Alarm 2 Button
until the alarm time flashes.
b) Press the
+
or
–
Button
as needed to adjust the display to the desired alarm time (hold for rapid setting). AM and PM
indicators appear at the bottom of the display. Make sure you set the display to the correct AM or PM alarm time.
c) During alarm setting, press the
Mode Button
to select Buzzer or Radio (last selected station) to wake to. Default
mode is buzzer.
d) Press the
Alarm Button
again to confirm alarm setting. To set another alarm, follow steps a - d.
Arming and Disarming Alarm (Turn Alarm Function ON and OFF)
Press
Alarm 1
or
Alarm 2 Button
to arm or disarm alarm function. When armed, the related alarm icon appears in the
display.
Resetting the Alarm to Come on the Next Day
When the alarm is sounding, press the related
Alarm Button
or the
Power Button
to stop the alarm and reset it to come on
the following day.
Snooze
Press the
Snooze/Dimmer Button
after the alarm sounds. The alarm will be silenced and come on again after nine
minutes. Snooze can be pressed several times during the 1 hour alarm cycle.
Sure Alarm
The unit has a sure alarm feature so the buzzer alarm will still sound in the event of power failure, if backup battery is installed.
Radio
Setting up Antenna
a) The unit has an internal AM antenna. Adjust the location of the unit as needed for best AM reception.
b) Extend FM Antenna (on back of unit) fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
a) Press the
Mode Button
as needed to select FM or AM radio band, indicated by the FM or AM icon on the display.
b) Turn the
Tuning Knob
on the right side of the unit to tune radio to a desired station. The time display changes to radio
frequency during tuning. After five seconds the display returns to the current time.
c) Turn the
Volume Knob
to adjust unit volume up or down.
d) Press the
Power Button
to turn the unit off.
Using the RT205
