å
Carefully turn your unit over onto its front edges.
å
Unfold the SMALL BACK (I) and lay it over the bottom of
your unit.
å
Make equal margins along all four edges of the SMALL
BACK (I). Push on opposite corners of your unit if needed
to make it "square".
å
Fasten the bottom and side edges of the SMALL BACK (I)
to your unit using the NAILS (5).
å
NOTE: Do not fasten the upper edge of the SMALL BACK
at this time.
å
Repeat this step for the LARGE BACK (H).
å
NOTE: The LARGE BACK (H) will overlap the SMALL
BACK (I).
Step 9
Page 12
www.sauder.com/service
425810
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Caution
I
Do not fasten NAILS along this
edge until the LARGE BACK (H) is
overlapping the SMALL BACK (I).
The LARGE BACK (H) will
overlap the SMALL BACK (I)
along the SHELF (G).
NAIL
(46 used in this step)
5
Unfi
nished
sur
face
Unfi
nished
sur
face
H
I
H
G
