8
3. End Character Setting
By default, the scanner does a carriage return after scanning a barcode ( the same as
pressing the “enter”key on the keyboard )
4. Beep setting
** scan one of the following barcode to select the decoding beep mode.
Note：
If the scanner is on beep off and you want the scanner beeps on high tone-high
volume(for example), please scan the setting code “Beep-on “first.
CR
LF + CR
Tab
Disable suffix
Beep - on
Beep - off
High Tone -High volume
High Tone-Low volume
Medium Tone-High volume
Medium Tone-Low volume
