5
Step Three
-Set base panel (1) on a flat surface as shown.
-Join panel (2), (3), (6), (7) by inserting eight bolts in the holes of the four panels. Using eight
excenter fittings lock the bolts.
Step Four
-Attach upper firebox trim (8) to left & right inside panel by securing 2
screws through 2
washers. Tighten all the screws with the allen wrench provided.
-Attach left center panel (9) to left outside panel by securing 1
allen
long
screw through 1 washer.
Tighten the screw with the allen wrench provided.
-Repeat with right center panel (10).
1
2
6
7
3
B
B
8
9
10
C
D
E
long allen