6
How to start using the Dreamoc Scandinavia 180
To keep the display in a pristine condition, we have included a set of white
cotton gloves to be used when handling the Dreamoc. This prevents setting
too many finger marks on the surface. Should this happen anyway, the
housing can be cleaned with a damp cloth. For the optic – please use the
supplied dry cloth.
Once the Dreamoc is out of the box, you have to remove the transport straps.
Be sure to save them for later use if the unit should be transported again.
When removing the straps be careful not to damage the optic.
Attached to the bottom of the display you will find the power cable. Insert the
power cable and connect it to a power outlet. AC 100-240V, 50-60 Hz. Check
that the I/O switch is set to I (on/off: I = ON, O = OFF).
Insert the power cable and connect it to a power outlet. AC 100-240V, 50-60
Hz, 240W. Check that the I/O switch is set to I (on/off: I = ON, O = OFF).
