CHAPTER 2
Before getting started
• Read this user manual and follow the instructions.
• Installation of the Dreamoc POP3B must be done according to this user manual, and must be per-
formed by an adult (Over 21 years).
Placement
• The Dreamoc POP3B must be placed on a horizontal, stable and plane surface. The floor stand must
be fitted with sufficient ballast.
• Do not install the Dreamoc POP3B in narrow passageways or other places where a lot of people and
equipment has to pass close by, thereby risking collisions that might cause the Dreamoc POP3B to
tip over causing human injuries and damage to property.
• No sand or dust! Fine sand or dust entering the system could cause malfunctions or defects.
• No water or oil! Water or oil entering the system could cause electric shock, malfunctions or de-
fects.
• Be careful of unusual ambient temperature. Using the system in a place where the temperature is
over 40°C (104°F) or lower than 10°C (50°F) may result in malfunction.
• Do not place the Dreamoc POP3B in direct sunlight or near magnetism, corrosive gas or ultrasonic
humidifier. This could cause malfunction.
5
Operation
• The Dreamoc POP3B must be connected to a power outlet with current and voltage as described in
the product marking.
• Turn off the power to the Dreamoc POP3B before opening the top lid or changing the SD card.
• Unplug this unit when unused for long periods of time.
• Do not block any ventilation openings. Install the unit in accordance with the instructions.
• During service and cleaning the Dreamoc POP3B must be turned off, and the power plug removed
from the outlet. To disconnect the apparatus from the mains, the plug must be pulled out from the
mains socket, therefore the mains plug shall be readily operable.
• Handle the liquid crystal display (LCD) with care. The LCD is a very delicate display device: Do not
press its surface with excessive force, hit it or prick it with a sharp object.
