Maintenance
Before attempting to perform any maintenance on the unit, disconnect the
power adapter.
Filter
Suggested time of changing filter:
about every 3 months.
It depends on different locations and usage level. For example, changing
time of filter may be shorter in contaminated zones or smoking areas, etc.
Please change the filter if the purification results are not good.
Cleanup routine: biweekly - use soft brush or dry cotton cloth to clean the
filter surface only. Do not use water to wash the filter.
Do not force, press, or pull because the filter can be broken or deformed
easily. Please change to new filter before using if it is damaged. Whenever
you change the filter, hold down the “Filter Reset” button until it beeps.
Cylinder inner surface cleaning
Notice
1. Keep surface of the sensor clean, or sensitivity is affected and will fail to
work.
2. Recommended cleaning cycle is less than 1 month for daily use.
3. Clean the sensor with a cotton swab as shown in the picture below.
*
Do not use detergent or any liquid in the cleaning process.
External surface
Please use dry soft fabric to wipe the
surface, inlets and outlets. Do not use a
chemical cleaning agent.
During long periods of no use
Unplug the unit from socket.
Clean the surface and filter.
Store in a dry and cool place and cover with plastic bag.
Note: UV Light (LED) does not need replacement.
www.AdvancedPureAir.com
1-888-601-5886
7
MAINTENANCE